30A 240V relay for all PWS 45-75 (208V-240V) & PB 200-L (Series 2 & up)

Warning: electrical testing should be conducted by trained individuals only.

Testing Relay: Take a photo of the wiring before removing all female connections.

Coil - male spades 0 and 1 should reflect a 3.6 ohm resistance. With coil energized, normally open male spade contacts #2 and #4 along with #6 and #8 will connect and complete circuits.

If the relay is bad, any of the following may occur:

- Open leg on coil.

- Continuity may exist between spades 2 and 4 and/or 6 and 8 without coil being energized.